Pressure Systems offers a wide variety of Inline, Detonation and Free Venting flame arresters. All models are designed to inhibit flame propagation by absorbing and dissipating heat using spiral wound crimped metal ribbon flame cell element.

KSFI Inline flame arresters are designed, manufactured and tested to API2000 and British standard specification BS7244.

They prevent the propagation of flame from the exposed side of the unit to the protected side by the use of a 316L stainless steel crimped metal ribbon type flame element.

Inline flame arresters can be installed either vertically or horizontally within a designated distance from the potential ignition source.

KSFH Inline flame arresters are designed, manufactured and tested to API2000, British standard specification BS7244 and FM approved.

They prevent the propagation of flame from the exposed side of the unit to the protected side by the use of a 316L stainless steel crimped metal ribbon type flame element.

Inline flame arresters can be installed either vertically or horizontally within a designated distance from the potential ignition source.

KSFE End of line flame arresters are designed to allow free venting in combination with flame protection for vertical vent applications.

Prevents flame propagation by absorbing and dissipating heat using spiral wound crimped ribbon SS316L flame cells, allowing maximum flow with maximum protection.

KSFD Inline detonation flame arresters provide positive protection against flame propagation in piping systems that are manifolded or have long runs.

These arresters are designed to stop an ignited flammable vapour mixture travelling at subsonic or supersonic velocities. They are also designed to protect against continuous burning against the SS316L cell for a specific period.