Rembe GmbH Safety+Control

Display: List / Grid
Sort By:
Show:
  • REMBE BT-KUB Reverse Acting Buckling Pin Bursting Disc
    The BT-KUB can be used with any gas, vapour or liquid media under the harshest of conditions due to its standard operating ratio of 98%, the tightest operating ratio available in the burst disc industry.  The two layer material design and range of materials of construction offer the greatest..
  • REMBE BT-ODV Forward Acting Rupture Disc
    For low to medium pressures ODV is primarily used for applications with low to medium pressures, e.g. for gases, liquids and applications with two-phase flows. The disc has a standard operating ratio of max. 80 %. For burst pressures of less than 1 barg, ODV can be installed directly between flan..
  • FARADO Electrostatic Grounding System
    The Farado® Grounding System allows safe loading and unloading of mobile tanks (mounted on trucks, wagons or trolleys and also big bags etc....) in which flammable substances are poured at high speed generating electrostatic charges that can cause sparks and explosions.  To prevent the accumul..
  • REMBE Accessories - Signalling Devices
    For continuous monitoring of your rupture disc   Automated processes use intelligent signalling systems to keep you continuously informed about the status of your entire plant and any faults that may arise. You can even install signalling devices for rupture discs that have already ..
  • REMBE BT-IKB Reverse Acting Rupture Disc
    The reverse acting rupture disc with the patented manufacturing process The IKB® rupture disc was developed to provide reliable protection against excessive overpressure and vacuum in equipment such as pressure vessels, pipe systems, gas cylinders and reactors. It is suitable for applications wit..
  • REMBE BT-STAR Forward Acting Rupture Disc
    For low to high pressures  STAR is primarily used in applications with low to high burst pressures, especially in the oil and gas industry, petrochemicals and chemicals, applications with liquified gases and processes that involve pressure cycling. The standard operating ratio is up to 80 % ..
  • REMBE EDP Domed Single-Layer Explosion Panel
    The single-layer EDP explosion panel is recommended for protection against fluctuating or cyclic working pressures of silos, filters, bucket elevators, bunkers, cyclones. The domed construction provides high stability up to a pressure ratio of 70%. The rated breaking points (Pat. No. EP 07 73 393) a..
  • REMBE EX-GO-VENT Single-Layer Explosion Panel
    This Explosion Panel suits most standard applications such as silos, filters, bucket elevators, bunkers, cyclones at operating pressures or vacuum of 50% of Pstat. The standard burst pressure is 0.1 barg (1.45 psig) @ 22 °C (71.6 °F). The EX-GO-VENT incorporating bionic structures (Pat. No. EP 07 73..
  • REMBE Q-BOX-II Flame-Reduced Explosion Vent
    The Q-Box II flame-reduced explosion vent can be used to great effect either outdoors or indoors. When used indoors it dispenses with the headaches of positioning complex, cumbersome and expensive vent ducting. The Q-Box II providing low pressure resistance, effectively eliminates flame and heat emi..
  • REMBE Q-ROHR-3 Indoor Explosion Vent
    The Q-Rohr-3 explosion protection system is a proven reliable product. It has been designed and engineered following extensive research and development culminating in the most innovative and efficient flameless venting product on the world market today. The consistent demand..

With over 40 years experience, our products are known the world over for their quality, efficiency and long life.

  • 1800 815 102

Get in touch!